Lunar and Planetary Institute

Apollo 16 Mission

Science Experiments - Laser Altimeter

The Laser Altimeter measured the heights of lunar surface features.

The Laser Altimeter Experiment was performed on Apollo 15, 16, and 17. In this experiment, a pulse from a laser was aimed at the lunar surface. The reflection of the pulse from the surface was then observed with a small telescope. The length of time the pulse took to travel from the spacecraft to the Moon and back is related to the height of the spacecraft above the surface of the Moon. Measurements were made roughly every 30 kilometers across the Moon's surface. These measurements are sufficiently accurate to distinguish height variations of 10 meters between adjacent measurement points. On Apollo 16, measurements were obtained for a total of 7 1/2 orbits.

The figure shows an example of the results from this experiment. The farside is shown on top and the nearside on the bottom. All elevations are shown relative to the Moon's average radius of 1738 kilometers. Mare regions such as Oceanus Procellarum are typically several kilometers lower than the surrounding highlands. Mare regions also tend to be much smoother than the highlands. The farside tends to be both higher and rougher than the nearside.

Additional Experiment Details (NSSDC)